Filter
Top Products
User’s Guide for Polycom HDX Systems and the Polycom Touch Control
Polycom, Inc. 25
To delete slides from a USB storage device:
1 On the UC Board screen, tap the Trash Can icon with your
stylus.
All slides on the page display X icons.
2 On the slide you want to delete, tap the X icon with your stylus.
Saving Content on the UC Board
To save changes to content on the UC Board:
>> As shown in the following figure, tap the Save icon with your UC
Board stylus.
You hear a beep tone indicating content is saved to the USB storage device.
Points to note about the UC Board
When a USB memory device connected to your HDX system, the following
scenarios are possible:
• When you accept an incoming call, the UC Board closes and the current content
is saved automatically.
• When a point-to-point call ends, the UC Board closes and the current content is
saved automatically.
• In a multipoint call, if the far end hangs up the call, the UC Board content does
not close. When the near site also hangs up the call, the UC Board closes and
the content is saved.
• If you annotate a slide and save your changes, an original slide copy is saved
on the USB storage device, resulting in an original copy and an annotated copy.
• While viewing slides, if you annotate an existing slide or create a new
whiteboard and then save your changes, the new whiteboard is stored after the
slide you last viewed.
• When slides are deleted, added, or saved, slide order is maintained so that no
gaps exist in numbering.