Filter
Top Products
110 I-PentaMAX System Manual Version 3.A
Power Supply connector, 13
Power supply, high voltage
IIC-100, 12, 37, 96
IIC-200, 12, 37
MCP-100, 12, 37, 96
Preopen Shutter mode, 55
Procedures
fuse replacement, 26, 77
Readout
binning, 66
hardware, 66
digitization, 69
frame transfer, 68
rate, 69
subsection of array, 66
Readout rate
control of, 69
precision vs speed tradeoff, 69
Readout time, 54
Readout times (full frame) for several CCD
types
table of, 66
Relay Lens, 44
Resolution
loss of with binning, 66
Response latency, 55
S/N ratio, 63, 68
Safe, 52
Safe Mode, 52
as used for setting up, 52
flowchart, 53
missed events, 52
Safety related symbols used in manual, 12
Saturation, 63
SGI Workstations, 26
Shift register, 64
Shutter
compensation time, 54
frame transfer, 58
Shutter mode operation, 36
Shutter modes, 37
Disable, 52
Normal, 52
Preopen, 52, 55
SHUTTER signal, 15
Signal-to-noise ratio
on-chip integration, 63
Smearing and frame transfer cameras, 63
Software binning, 68
Software Trigger, 57, 99
Specifications, 81
A/D converters, 83
cooling, 82
inputs and outputs, 82
Specifications (cont.)
miscellaneous, 84
STARTACQ, 52
STATUS indicators, 17
Sun Workstations, 26
Switches
Actual vs Set Point, 17
Power ON-OFF, 18
Temperature ON-OFF, 17
Synchronous mode. See Full Speed mode
System description, 9
Technical support, 106
Temperature
environmental operating range, 20
storage, 20
Temperature control
air cooling, 33
introduction to, 33
overshoot, 33
problems, 78
time to lock, 33
Tygon tubing, 34
water cooling, 34
chilled water constraint, 34
pressure and flow rate, 34
required connections, 34
Temperature display, 33
set versus actual, 16
Temperature display mode switch, 33
Temperature panel meter, 16
Temperature Set adjustment, 17, 33
Temperature setting range, 16
Temperature STATUS lights, 33
Temperature/Power Supply features
ACTUAL vs SET POINT switch, 17
ERROR indicator, 17
fan, 18
ON-OFF power switch, 18
ON-OFF switch, 17
POWER indicator, 17
power input assembly, 18
STATUS indicators, 17
TEMP SET adjustment, 17
TEMPERATURE panel meter, 16
TO CAMERA connector, 18
Termination of video output, 14
Thermostat control range, 16
Timing control, 52
Timing modes
table of, 51
TO CAMERA connector, 18
Triggering modes, 52
Unpacking and initial inspection, 25
VCR, 14