Filter
Top Products
LANGUAGE/CLOCK SET1
26 English
SETTINGS
You can set the date/time at which the time is switched
from standard time to summer time, and the date/time at
which the time is switched back again.
The example below is the default value.
Example:
After the clock display reaches 30 March 2003,
01:59, the next clock display is 03:00, putting the
clock an hour ahead (summer time).
After the clock display reaches 26 October 2003,
01:59, the next clock display is 01:00, putting the
clock an hour behind (back to standard time).
(1) Sets the week for switching to summer time.
(2) Sets the day of the week.
(3) Sets the month.
(4) Sets the time.
(5) Sets the week for ending summer time.
(6) Sets the day of the week.
(7) Sets the month.
(8) Sets the time.
7 Press the [ ] button.
The cursor moves to “LST“.
8 Press the [ ] and [ ] buttons to select
the desired week, then press the [ ]
button.
The cursor moves to the day of the week.
9 Press the [ ] and [ ] buttons to select
the desired day of the week, then press
the [ ] button.
The cursor moves to “MONTH”.
10 Press the [ ] and [ ] buttons to select
the desired month, then press the [ ]
button.
The cursor moves to “TIME”.
11 Press the [ ] and [ ] buttons to select
the desired time, then press the [ ]
button.
The cursor moves to the minutes portion of the time.
Set the desired minutes in the same manner.
The <SUMMER TIME> settings are now finished.
This section describes how to have the time synchronized
automatically when two or more digital video recorders are
connected. If you set the <EXT.CLOCK SET> time to 5:00,
all the connected devices are synchronized to the same
time (to the nearest second) every day at 5:00.
(Default setting: 01:00)
1 Use a cable to connect the CLOCK ADJ
OUT terminal on the rear panel of one
digital video recorder to the CLOCK
ADJ IN terminal on the second digital
video recorder.
Terminal No.
6: CLOCK ADJ IN
7: CLOCK ADJ OUT
8: COMMON
z Do not use a loop connection.
2 Press the [ ] and [ ] button to move
the cursor to “ADJUST. TIME”.
3 Press the [ ] button.
“01” flashes.
4 Press the [ ] and [ ] button to select
the desired time, then press the [ ]
button.
When “USE” is selected for “MODE” under
<SUMMER TIME>.
(1) (3) (4)
(5) (7) (8)
(2)
(6)
<EXT.CLOCK SET> settings
789
10 11 12 13 14 15 16 17 18 19
6789
10 11 12 13 14 15 16 17 18 19
1st DVR 2nd DVR
To 3rd DVR
j
h
Set the time
e00_l8hbc_hd_6.book Page 26 Wednesday, July 30, 2003 2:34 PM