Filter
Top Products
SCREEN SET MENU2
English 31
2 Select “2. SCREEN SET MENU”, and
press the [ ] button.
The <SCREEN SET MENU> screen is displayed.
3 Select “3. MOTION SENSOR SET”, and
press the [ ] button.
The motion sensor setting screen for camera No. 1
appears.
4 Press the desired [CHANNEL] button to
select the desired camera No.
5 Press the [ ] or [ ] button to select
“LEVEL,” then press the [ ] or [ ]
button to set the sensitivity.
The level can be set to a value between 1 and 10. The
lower the value, the higher the sensitivity. (Default setting:
OFF)
z A confirmation tone sounds when making sensor
settings.
6 Press the [ ] or [ ] button to select a
sensor operation position, then press
the [ ] or [ ] button to set the
selection (you can set up to 20
positions).
You can set sensor operation positions at any screen position.
z Moving the cursor
Each time you press the [ ] button, the cursor moves from
left to right in the top row. After the cursor has reached the
end of the row, it moves from left to right in the row below.
You can press the [ ] button to move the cursor in the
opposite direction.
Pressing and holding the [ ] or [ ] button moves the
cursor as follows:
z Setting sensor operation positions
Pressing the [ ] or [ ] button once enables the currently
selected position to set (displays
). Pressing the [ ] or
[ ] button again disables the setting (displays –).
z Operation position setting example
If you set an area near the centre of the image, the
sensor operates and recording starts when a moving
subject near the centre of the screen is detected.
7 When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
z To activate alarm recording when the motion sensor
detects movement, display the <RECORD MENU>, and
set the “ALARM TRIGGER” in “ALARM REC MODE
SET” to “SENSOR.” (JP. 34)
Displays current
camera number
No.2No.1
No.3 No.4
1
2
3
4
12
34
HI A
20-05-03 08:30:35 AL 00015
Set sensor positionLEVEL
Setting example
e00_l8hbc_hd_6.book Page 31 Wednesday, July 30, 2003 2:34 PM