Sanyo DSR-M804P DVR User Manual


 
RECORDER MENU3
34 English
SETTINGS
1 Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU> screen
is displayed.
2 Select “3. RECORDER MENU”, and
press the [ ] button.
The <RECORDER MENU> screen is displayed.
3 Press the [ ] or [ ] button to select
“2. ALARM REC MODE SET”, then press
the [ ] button.
The <ALARM REC MODE SET> screen is displayed, with
the cursor positioned on “ALARM MODE”.
[Settings] ( indicates default setting.)
*CC: Operates while alarm is active. (Operates for more than 5 seconds per alarm.)
ALARM REC MODE SET
[] button[MENU] button [ ] button
[] button[EXIT/OSD] button
(1)
(2)
(3)
(4)
Item Setting Description
(1) ALARM MODE
OFF Doesn't perform alarm recording.
ENABLED Always performs alarm recording, whether or not timer recording is being performed.
AL-REC ON TIMER Performs alarm recording only during timer recording.
AL-REC OFF TIMER Performs alarm recording only when timer recording is not being performed.
OLY AL-RC ON TMR
Performs alarm recording only for the amount of time set by the timer.
Doesn't return to timer recording standby.
(2)
ALARM
DURATION
Time selections*: CC/5SEC/10SEC/20SEC()/40SEC/1MIN/2MIN/3MIN/4MIN/5MIN/10MIN/15MIN
Sets the amount of time for recording when a single alarm is generated.
(3)
ALARM
TRIGGER
Selects how to detect intruders.
ALARM
Performs alarm recording when an external alarm is generated (when a switch is attached
to the alarm input terminal on the rear panel, and the switch is activated).
SENSOR
Performs alarm recording when the motion sensor detects movement. See the information
on setting the motion sensor. (JP. 30)
ALARM OR SENSOR Performs alarm recording when either the external alarm or motion sensor is activated.
ALARM AND SENSOR
Performs alarm recording when both the external alarm and motion sensor are activated
simultaneously.
(4) VIDEO LOSS
ON
Displays “VIDEO LOSS” on the screen when the camera image is interrupted.
Also outputs the WARNING signal to a rear panel terminal.
OFF Doesn't display “VIDEO LOSS” on the screen when the camera image is interrupted.
e00_l8hbc_hd_6.book Page 34 Wednesday, July 30, 2003 2:34 PM