Filter
Top Products
28 English
SETTINGS
2 SCREEN SET MENU
z “SEQUENCE” is used to set the time interval used for
switching screens when displaying the image from each
channel sequentially.
z “DISPLAY” setting is used when an alarm is generated.
It sets whether to display the image from the channel
that generated the alarm on a single screen, or whether
to display on the quad screen.
z “ALARM PRIORITY” sets the display method for alarm
recording screens when an alarm is generated on
another channel during alarm recording.
Example 1: Displays screens in order of alarms.
Example 2: Displays alarm recordings on the single
screen sequentially.
z “MASK SET” is used to hide the monitor display of
some channel images in the normal screen and
playback screen.
z Lets you set titles for camera Nos.
z If the motion sensor is set on the monitor, enables
alarm recording when a moving subject is detected.
<MAIN MENU> <SUB MENU>
Screen settings
MONITOR SET
2
4
1
3
HI A
20-05-03 08:30:35 AL 00015
1
1
2
3
4
HI A
20-05-03 08:30:35 AL 00015
HI A
20-05-03 08:30:35 AL 00015
3
1
2
2
3
4
HI A
20-05-03 08:30:35 AL 00015
HI A
20-05-03 08:30:35 AL 00015
TITLE SET
MOTION SENSOR SET
3
1
2
2
3
4
HI A
20-05-03 08:30:35 AL 00015
HI A
20-05-03 08:30:35 AL 00015
12
43
HI A
20-05-03 08 :30:35 AL 00015
Set camera title
FLOOR 1 2
Example of set
motion sensor
e00_l8hbc_hd_6.book Page 28 Wednesday, July 30, 2003 2:34 PM