Filter
Top Products
English 41
5 BUZZER SET
The <BUZZER SET> screen lets you set a warning buzzer
to sound when events occur such as alarms being
generated or the remaining hard disk space reaching zero.
Use this screen to make settings as needed.
[Settings] ( indicates default setting.)
z Press any button to stop the BUZZER sounding.
1 Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU> screen
is displayed.
2 Select “5. BUZZER SET”, and press the
[ ] button.
The <BUZZER SET> screen is displayed.
3 Press the [ ] or [ ] buttons to select
the desired function, then press the [ ]
button.
The setting flashes.
4 Press the [ ] or [ ] buttons to change
the setting, then press the [ ] button.
5 Repeat procedures 3 to 4 to set other
functions as needed.
6 When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
<BUZZER SET> screen setting items
Item Setting Description
(1) ALARM ON
ON
Sounds buzzer when alarm is
generated.
OFF
Doesn't sound buzzer when alarm is
generated.
(2) DISK FULL
ON
When “OVER WRITE” is not set,
sounds buzzer when remaining hard
disk space reaches zero.
OFF
When “OVER WRITE” is not set,
doesn't sound buzzer when
remaining hard disk space reaches
zero.
(3) KEY IN
ON
Sounds buzzer when operation
button is pressed.
OFF
Doesn't sound buzzer when
operation button is pressed.
(4) WARNING
ON
Sounds buzzer in following cases:
z Hard disk drive error
z Fan error z Recording error
OFF
Doesn't sound buzzer in following
cases:
z Hard disk drive error
z Fan error z Recording error
(5) NON REC
ON
Sounds buzzer when recording is
stopped.
OFF
Does not sound buzzer when
recording is stopped.
<MAIN MENU>
(1)
(2)
(3)
(4)
(5)
Settings
[] button[MENU] button [ ] button
[] button[EXIT/OSD] button
e00_l8hbc_hd_6.book Page 41 Wednesday, July 30, 2003 2:34 PM