Filter
Top Products
SECURITY LOCK SET6
English 43
3 Press the [ ] button.
The first password entry bar “-” flashes.
4 Press the [ ] and [ ] buttons to select
the character to enter.
Example:
Selecting “1”
5 Press the [ ] button.
The second password entry bar flashes.
6 Repeat procedures 4 to 5 to enter the
remaining digits (“23456AB” in this
example).
z To set a 4-digit password
When you have entered four digits, and the fifth
password entry bar is flashing, press the [ ] button.
7 When you have entered the password,
press the [ ] button.
The cursor moves to “OFF” (flashing).
8 Press the [ ] and [ ] buttons to select
“ON”.
z If you select “OFF” for the “ADMIN” setting, you cannot
set the “USER” password.
9 When you have finished making the
setting, press the [ ] button.
The cursor moves to
“USER”.
If you do not want to set
a user password, the
password setting is now
finished.
Press the
[] and []
button to move the cursor to “REC CONTROL”, to set the
authorization for recording and playback operation. (
J
P. 44)
Example: Setting “AB123456”
Perform Steps 1 and 2 on P. 42
3 Press the [ ] and [ ] buttons to move
the cursor to “USER”.
4 Press the [ ] button.
The first password entry bar “-” flashes.
Example: A
Press the [ ] and [ ] buttons to select “A”.
5 Press the [ ] button.
The second password entry bar flashes.
Press the
[] and [] buttons to select “B”.
Use the procedures as “Administrator password” to set
“123456.”
6 When you have finished making the
setting, press the [ ] button.
The cursor moves to “OFF” (which flashes).
7 Press the [ ] and [ ] buttons to select
“ON”, then press the [ ] button.
The cursor moves to “REC CONTROL”.
Setting the user password
e00_l8hbc_hd_6.book Page 43 Wednesday, July 30, 2003 2:34 PM