Filter
Top Products
Easy to Use Functions
-103
2 Enter the remaining 3 digits in
the same way as above and
press
.
3 Re-enter the same key code in
Reconfirm and press
.
Note
•The Keylock function will become
temporarily disabled.
When “Anti-Theft” is set, the keycode
inputting section appears after the
power is turned on. At that time, enter
the right keycode.
• Press the buttons on the remote control if
the buttons on the remote control are used
for setting the keycode. In the same manner,
press the buttons on the projector if the but-
tons on the projector are used for setting the
keycode.
Info
•Once the function is activated, you must
remember the correct keycode. We sug-
gest you record the keycode in a safe
place where only authorized users will
have access. If you lose or forget your
keycode, you will need to contact your
nearest Sharp Authorized Projector Dealer
or Service Center (see page 118). You
may need to bring your projector to them
to restore the projector to original factory
condition (password and keycode reset).
•If the Anti-theft function is set and you
loose the GyroRemote, you will not be
able to release the Anti-theft function. In
case you loose the GyroRemote, contact
your nearest repair center.
PG-M25X#E#p97_106.p65 02.4.29, 3:24 PM103