Filter
Top Products
Progressive Mode
This function allows you to select the pro-
gressive display of a video signal. The pro-
gressive display projects a smoother video
image.
Select “Progressive Mode” in the “Pic-
ture” menu on the menu screen.
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
• 2D Progressive
This function is useful to display fast-moving
images such as sports and action films. This
mode optimizes the image in a displayed frame.
• 3D Progressive
This function is useful to display relatively
slow-moving images such as drama and
documentary more clearly.
This mode optimizes the image by estimat-
ing the movement of a number of preced-
ing and succeeding frames.
• Film Mode
Reproduces the image of film source clearly.
Displays the optimized image of film
transformed with three-two pull down (NTSC
and PAL60Hz) or two-two pull down
(PAL50Hz and SECAM) enhancement to
progressive mode images.
*
The film source is a digital video recording
with the original encoded as is at 24 frames/
second. The projector can convert this film
source to progressive video at 60 frames/
second with NTSC and PAL60Hz or at 50
frames/second with PAL50Hz and SECAM
to play back a high-definition image.
•
When using progressive inputs, these inputs
are directly displayed therefore 2D
Progressive, 3D Progressive and Film Mode
cannot be selected. These modes can be
selected in interlace signals other than 1080I.
•
In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally, when the film source has been entered.
• In PAL50Hz or SECAM, the two-two pull
down enhancement will be enabled only in
the Film Mode, when the film source has
been entered.
-60
Adjusting the Picture (cont.)
PG-M25X#E#p50_64.p65 02.4.29, 3:16 PM60