Filter
Top Products
Easy to Use Functions
Using a Memory Card
When a memory card is installed, images stored in the memory card can be projected.
If presentation files are stored in the memory card you can make presentations using only
the projector and the memory card, without having to use a computer.
-75
Displaying of the
Contents in the Card as
an Index
1
Insert the memory card into the
INPUT 4 terminal on the projector.
•For details on installing the card, see
page 31.
•The current mode will automatically
change to INPUT 4 mode, when the
PC Card is inserted into INPUT 4
terminal, and the files stored in the
card will be displayed as an index.
(Index mode)
Note
•For details about the display format of the
Index mode, see pages 76,77.
•For details on how to install the wireless
LAN card in the projector, see page 68.
•The following are the files that this
projector can handle.
Non-compressed Bitmap (.BMP)
JPEG files (.JPEG / .JPG)
Non-compressed TIFF files (.TIFF / .TIF)
VQ files (.VQ)
Script files (.SSF)
Ejecting the Card
Make sure to perform the following procedures
before removing the card.
Select Card eject in the Card menu on
the menu screen
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 Select “Eject PC Card” and
press
.
•After a few seconds, the message “Yo u
may safely eject the PC Card” will be
displayed.
PG-M25X#E#p65_77.p65 02.4.29, 3:19 PM75