Filter
Top Products
-12
Other connected equipment
■ When connecting a computer or other audio-
visual equipment to the projector, make the
connections AFTER turning off the projector
and the equipment to be connected.
■ Please read the operation manuals of the pro-
jector and the equipment to be connected for
instructions on how to make the connections.
Using the projector in other countries
■ The power supply voltage and the shape of
the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, be sure
to use the appropriate power cord for the
country you are in.
Temperature monitor
function
■ If the projector starts to
overheat due to setup prob-
lems or blockage of the air vents, “ ” and
“ ” will blink in the lower left corner of
the picture. If the temperature continues to
rise, the lamp will turn off, the TEMPERA-
TURE WARNING indicator on the projector
will blink, and after a 90-second cooling-off
period the power will shut off. Refer to “Main-
tenance Indicators” on page 70 for details.
Info
• The cooling fan regulates the internal tem-
perature, and its performance is automatically
controlled. The sound of the fan may change
during projector operation due to changes in
the fan speed. This does not indicate mal-
function.
• Do not unplug the power cord during
projection or cooling fan operation. This can
create damage due to the rise in internal
temperature, as the cooling fan also stops.
IMPORTANT SAFEGUARDS (cont.)
PG-M25X#E#p08_20_a.p65 02.4.29, 4:56 PM12