Filter
Top Products
Using the GyroRemote (cont.)
GyroRemote Channel
Setting
The GyroRemote uses radio signals, which
can receive interference under certain
conditions. To avoid interference, when using
multiple GyroRemotes, register a different
channel for each GyroRemote in the projector.
The GyroRemote has 8 channels for U.S.,
Canada, etc. and 4 channels for Europe,
Australia, Oceania and Aisa.
1 Press located on the
GyroRemote.
•You can also confirm the RF channel
by the number of times the LED
indicator flashes.
(Ex: RF Channel 3 if the LED indicator
flashes 3 times.)
2 Hold for more than 1 sec.
•Each time you press for over 1 sec.
the RF channel changes as shown
below.
For U.S., Canada, etc.
→ 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8
For Europe, Australia, Oceania and Asia
→ 1 → 2 → 3 → 4
Registering the GyroRemote
in the Projector
When using one GyroRemote with multiple
projectors or one projector with multiple
GyroRemotes, the GyroRemote(s) should be
stored in the projector.
1 Select “Register R/C” in the
Option (1) menu.
2
On the “Do you want to enter the
Learn MOde?” (If the Gyro is
connected to projector by cable,
temporarily unplug the cable
from the projector and press
ENTER button.) message,
select “Yes” using
or , and
press
.
RF CH : 3
LED
indicator
RF CH+ button
Adjustment button
(
"'\ |"'\ |
"'\ |"'\ |
"'\ |)
ENTER button
-42
PG-M25X#E#p33_49.p65 02.4.29, 3:12 PM42