Filter
Top Products
-104
Setting the Anti-Theft (cont.)
Changing the Keycode
• When “Anti-Theft” is selected and a pass-
word has been entered, the password input
box is displayed. After the password has been
entered, you can change the keycode.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 Enter the preset 4-digit keycode
in “Old Code” using the buttons
on the GyroRemote or on the
projector.
2 Press any button you like on the
GyroRemote or the projector to
enter the new keycode.
3 Enter the same 4-digit keycode
in “Reconfirm” .
Note
•If you do not want to set a keycode, leave
the keycode field blank in steps 2 and 3
and press
.
Info
•If you travel with your projector without
your GyroRemote, you will not be able to
unlock the Anti-Theft keycode.
Therefore, we recommend you use the
projector buttons to lock/ unlock the Anti-
Theft keycode.
-104
PG-M25X#E#p97_106.p65 02.4.29, 3:24 PM104