Filter
Top Products
-88
Displaying Dual Pictures (Pict in Pict)
Picture in Picture function allows you to display two pictures on the same screen. You can
display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture
from INPUT 1. (This function can only be set in the RGB menu.)
Displaying the Inset Picture
Select “Pict in Pict” in the “Options (1)”
menu on the menu screen.
Make sure
to operate when INPUT 1, INPUT 2 and
INPUT 3 all have signals.
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 Press to select .
•When operating with the GyroRemote,
press
to display “Button Assign
3/5” and press
4
.
•
P in P does not function with INPUT 4.
2 Press to change the image
in the inset picture.
3 Press , , or
to set the position of the inset
picture.
•Press to stop the frame from mov-
ing or to make the frame disappear.
Note
•Hold down and move the
GyroRemote in all directions, when
moving the position of the inset
picture using the GyroRemote.
-88
Adjustment
button ('"\ |)
INPUT
button
Enter button
PG-M25X#E#p78_96.p65 02.4.29, 3:22 PM88