Filter
Top Products
-94
Saving Projected Images
• This projector allows you to capture projected images (RGB signals) and set them as a
startup image, or background image when no signals are being received.
• You can capture the images that are input using analog RGB signals and Digital RGB XGA
signals.
Capturing the Image
Select “Image Capture” in the “Options
(1)” menu on the menu screen
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 Press or to select
“ Save Image” and press
.
•The projected image is captured. It
may take some time for capturing.
2
11
11
1 Press or to select
“Yes”.
22
22
2 Press
.
Note
•This function only works in 1024 x 768
(XGA) with the exception of 43 Hz vertical
which is a interlaced signal.
•The saved image is reduced to 256 col-
ors.
•Images from equipment connected to
INPUT 2 or 3 or images in INPUT 4 (card)
cannot be captured.
Deleting the Captured
Image
1
Select “ Delete” and press .
2
11
11
1 Press or to select
“OK”.
22
22
2 Press
.
-94
PG-M25X#E#p78_96.p65 02.4.29, 3:22 PM94