Filter
Top Products
70
Network Settings (cont.)
-70
5
Repeat steps 3 and 4 to enter the
remaining characters you want.
Note
•A maximum of 16 characters can be
entered
6 Press .
•The settings are stored and active.
Setting the IP Address
Set the IP Address of the projector.
Set “TCP/IP” in the network menu on the
menu screen.
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 Press or to select
TCP/IP and then press
.
2 Press or to select
“IP Address”, and then press
.
3 Press or to select
the values you want to set.
4 Press or to move the
cursor to the digit you want to
correct.
Note
•You can also move the cursor by pressing
on the GyroRemote.
•If you want to cancel the settings, press
.
PG-M25X#E#p65_77.p65 02.4.29, 3:18 PM70