Filter
Top Products
Introduction
-17
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Tapes for
removing the
batteries
Inserting the Batteries
The batteries (four R03 batteries (“AAA” size, UM/
SUM-4, HP-16 or similar)) are included in the package.
1 Slide the cover in the direction
of the arrow to open it.
2 Insert the included batteries.
•Insert the batteries making sure the po-
larities correctly match the
and
marks inside the battery compartment.
Info
•
When inserting the batteries into the battery
compartment of the GyroRemote, make
sure that the batteries are placed over the
pullstring for the easy removal in the feature.
If not, it may be difficult to remove old
batteries when they have to be replaced.
3 Slide the cover in the direction
of the arrow to close it.
Note
•GyroRemote Sleep Function
To avoid battery consumption, the
GyroRemote automatically enters the
Sleep mode if not action takes place within
5 minutes. If the GyroRemote cannot be
operated, press once the POWER button
on the GyroRemote to resume operation.
Replacing the Batteries
The LED indicator will blink when
the batteries need to be replaced.
•Make sure to replace the batteries with new
batteries as soon as possible when the LED
indicator starts to blink.
•Be sure to use alkaline batteries.
Note
•If GyroRemote is idle for five minutes, it
will go into sleep mode to conserve battery
life. Pressing any button will make
GyroRemote up.
LED
indicator
Caution
• Insert the batteries making sure the polarities correctly match the and marks inside the battery compartment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove them using a cloth.
• The batteries included with this projector may be exhausteol over a short period, depending on how they are kept. Be sure to replace them as soon as
possible with new batteries.
• Remove the batteries from the remote control if you will not be using the remote control for a long time.
PG-M25X#E#p08_20_a.p65 02.4.29, 4:56 PM17