Filter
Top Products
Easy to Use Functions
-87
Selecting the Power Save Mode
The Power Save Mode or the Automatic Power Shutoff function allows you to reduce the
power consumption of the projector.
Setting the Power Save
Mode
Select “Power Save” in the “Options (1)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Description of Power Save Modes
ON
Quantity of light is 80%.
Power consumption is XXXW.
OFF
Quantity of light is 100%.
Power consumption is 295W.
Note
•It is set to “OFF” normally.
•“Power Save” mode is factory preset to
“OFF”.
•When setting the power save mode to
“OFF”, the projected images become dark.
Automatic Power
Shutoff Function
When no input signal is detected for more than
15 minutes, the projector will automatically
shut off if set to “
(On)”.
The Auto Power Off function will be disabled
when it has been set to “
(Off)”.
Select “Auto Power Off” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
•When the Auto Power Off function is set
to “
(On)”, 5 minutes before the power
turns off, the message “Power OFF in X
min.” will appear on the screen to indicate
the remaining minutes.
PG-M25X#E#p78_96.p65 02.4.29, 3:21 PM87