Filter
Top Products
Setup and Connections
-29
1
DVI to 15-pin
D-sub adaptor
(sold separately)
Connecting to Video Equipment
Connecting to
Component Video
Equipment
Use a 3 RCA to 15-pin D-sub cable and DVI to
15-pin D-sub adaptor when connecting to the
INPUT 1 terminal, component video equipment
such as DVD players and DTV* decoders.
*DTV is the umbrella term used to describe
the new digital television system in the United
States.
1 Connect the 3 RCA to 15-pin D-
sub cable using the DVI to 15-
pin D-sub adaptor.
2 Use the above cables to con-
nect the projector and the
video equipment.
3 Connect the projector and the
video equipment using a ø3.5
mm to RCA audio cable
(commercially available).
Note
•When connecting the projector to the
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Picture”
menu. See page 60.
•A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
Optional
accessories
3RCA to 15-pin
D-sub cable
Type: AN-C3CP
(9'10" (3.0 m))
DVI to 15-pin
D-sub adaptor
Model: AN-A1DV
(7.9" (20 cm))
To analog component
output terminal
To audio output terminal
DVD player or
DTV* decoder
3
ø3.5 mm to RCA audio
cable (commercially
available)
2
3 RCA to 15-pin
D-sub cable
(sold separately)
PG-M25X#E#p21_32.p65 02.4.29, 3:10 PM29