Filter
Top Products
Basic Operation
-43
3 Press on the GyroRemote
you want to register.
•The LED indicator on the GyroRemote
lights up.
•“Register” is displayed at the bottom
of the screen for a few seconds and
registration starts.
When storing is complete, “Learn
Mode” is displayed.
Note
•If no action is taken for more than 5
minutes, the projector exits from the
Learn mode.
4 Press
•This completes the Registration mode.
Registering Multiple
GyroRemotes in One
Projector
A maximum of 8 GyroRemotes for U.S.,
Canada, etc. and 4 for Europe, Australia,
Oceania and Asia can be registered.
1 Set the same channel for the
RF channel of the GyroRemote
you want to register.
2 Using step 2 in page 42, press
on the GyroRemotes to
be used.
•When registering other GyroRemotes
continuously, after each GyroRemote
is registered and the Registration
mode message is displayed, proceed
with the next GyroRemote.
•After 8 GyroRemotes for U.S., Canada
and 4 for Europe, Australia, Oceania
and Asia have been registered, the
Registration mode will automatically
terminate.
3 Press when the number of
registered GyroRemotes is
fewer than 8 for U.S., Canada
and 4 for Europe, Australia,
Oceania and Asia.
•This ends the Registration mode.
TEACH button
LED
indicator
Register
TEACH button
ENTER button
PG-M25X#E#p33_49.p65 02.4.29, 3:13 PM43