Filter
Top Products
20
Basic Conneciton
Using Other Types of Video Output
In order to view clearer DVD images, it is recommended that you use a commer-
cially available S-Video or component video cable when connecting your TV to the
video output.
Connecting Using
an S-Video Output
Connect the S-VIDEO output
jack on this recorder to the S-
VIDEO input jack on your TV
using a S-VIDEO cable (Com-
mercially available).
Important!
• When using this connection, set
“PROGRESSIVE” in “PLAYBACK
SETUP” to “OFF”. (When the
setting is “ON”, the disc playback
picture cannot be viewed.)
After the Connection
Plug in the power cords of the TV. Then
go to “EZ Set Up” (see page 23).
Connecting Using
the Component
Video Output
Connect the COMPONENT OUT
jacks on this recorder to the
COMPONENT input jacks on
your TV using a Component
Video cable (Commercially
available).
Important!
• If your TV is compatible with
progressive-scan component
video, set “PROGRESSIVE” in
“PLAYBACK SETUP” to “ON”. If
your TV is not compatible with
progressive-scan video, set to
“OFF”.
After the Connection
Plug in the power cords of the TV. Then
go to “EZ Set Up” (see page 23).
TV
The Recorder
To COMPONENT
input jacks
To COMPONENT
OUT jacks
TV
The Recorder
To S-VIDEO
input jack
To S-VIDEO
output jack
S-VIDEO cable
(Commercially
available)
Component
Video cable
(Commercally
available)
COMPONENT
OUT
(480I/480P)
Y
P
B
P
R
IN FROM
ANTENNA
VHF/UHF/CATV
OUT TO TV
DIGITAL OUT
OPTICAL
IN 1
AUTO
REC
IN 3
OUT
R
-
AUDIO
-
L
VIDEO
S-VIDEO
LINE
COMPONENT
OUT
(480I/480P)
Y
P
B
P
R
IN FROM
ANTENNA
VHF/UHF/CATV
OUT TO TV
DIGITAL OUT
OPTICAL
IN 1
AUTO
REC
IN 3
OUT
R
-
AUDIO
-
L
VIDEO
S-VIDEO
LINE
DV_RW2U#p19-23.p65 03.1.9, 7:32 PM20