Filter
Top Products
74
8
Press SET/ENTER.
• The part is played back from the start
point to the end point.
• If you select “NO” in the step 7, go to
step 9.
RETURN
ENTER
ENTER
EDIT(PL) MAKE TITLE
1 MAKE
YES NO
SELECT
9
Press \ to select “YES” and then
press SET/ENTER.
• The new title appears in the updated
Playlist.
EDIT(PL) PAGE 1/ 1
1 NEW
1/
‰
2 6:
‰
6AM PL
SELECT
RETURN
ENTER
ENTER
Searching for Start Point
and End Point Parts
You can use the procedures described below
during playback to search for the start point
and end point parts.
Æ Playback
Press |PLAY to playback the current title
that is paused.
Æ Searching for parts within a chapter
FWD or REV are convenient when
searching for parts within a chapter.
Æ Rapidly skipping parts
When the editing screen is displayed,
pressing SKIP SEARCH lets you skip by
recorded material at 5 minute intervals,
which is convenient for rapidly moving
through parts. This can be pressed
consecutively up to 4 times, enabling you
to skip 20 minutes of recorded material all
at once.
Only use the skip function within the same
title.
Æ Moving to the start of titles and chapters
When currently viewing or a title or chapter
that is far away from the part to be
selected, first search for the title or chapter
with the SKIP or SKIP .
Making a New Playlist (PL)
EDIT
100
OPEN/
CLOSE
POWER
AUDIO
TIMER
ON/OFF
TITLE
MENU
ANGLE
SETUP/
FUNCTION
DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS
+
TIMER PROG.
REC MODE
PROGRAM
AM/PM ERASE
REC
PLAY
STOP
SLOW
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER
INPUT
VOL
CH
TV CONTROL
STILL/PAUSE
SKIP
SEARCH
SKIP
F.ADV
ZOOM
INPUT
Æ Pause
When you have found a part that is close to
the start point or end point, press STILL/
PAUSE. Pausing playback makes it easier
to search for parts. Parts cannot be edited
in exact frames. The start point and end
point may shift slightly.
Æ Frame advance/Frame reverse
Recorded material is played back by
reversing individual frames when
F.ADV is pressed after pausing the
part. When F.ADV is pressed,
recorded material is played back while
reversing individual frames. (There is an
error of 2-3 frames during frame advance
playback.)
Æ Final selection of part
Press SLOW after the part has been
paused and select the start point and end
point by slow playback.
DV_RW2U#p71-85 .p65 03.1.14, 9:39 AM74