Filter
Top Products
86
This section explains each item of record setup. See “Basic
Settings of the Record Setup Screen” on page 87 to set
each item.
CHP INT.
This is used to set the interval at which chapters are
automatically inserted when recording in the Video mode.
RECORD SETUP
CHP INT. ON:3MIN
EXACT REC OFF ON
R REC START
2 PRESS1 PRESS
EX. AUDIO
STEREOD-MONO
D-MONO REC L R
RW INIT. V R VIDEO
SAP OFF ON
SELECT
ENTER
RETURN
ENTER
*
When “EXACT REC” has been set to “ON”, the auto chapter
interval becomes a little shorter (by a maximum of 1 minute).
EXACT REC
This function prevents a recording from ending out before it
is completed by automatically changing the recording mode
when timer recording (including VCR Plus+, timer recording
and disc timer recording) is unable to be completed in the
set recording mode due to insufficient time or available disc
space. (There may be times when considerable amount of
disc space remains available compared to recording time.)
• The EXACT REC function is activated when, during the
course of recording in the programmed order, the next
program is unable to be completely recorded due to
insufficient available disc space in the set recording mode.
• When the available disc space is extremely small low, the
recording may not be able to be completed even if the
EXACT REC function has been set.
• The EXACT REC function is not available during Simple
Recording Timer (page 51).
• The EXACT REC function is not activated during timer
recording in the VR mode when the recording mode has
been set to EP, or during timer recording in the Video
mode when the recording mode has been set to LP.
RECORD SETUP
CHP INT. ON:3MIN
EXACT REC OFF ON
R REC START
2 PRESS1 PRESS
EX. AUDIO
STEREOD-MONO
D-MONO REC L R
RW INIT. V R VIDEO
SAP OFF ON
SELECT
ENTER
RETURN
ENTER
Æ OFF: Recording continues in the recording mode set
during timer recording programming.
Æ ON: The recording mode is changed automatically
during timer recording to prevent the recording
from ending before it is completed.
Record Setup Screen
ON: ON: ON: ON: ON:
OFF
3 MIN 5 MIN 10 MIN 15 MIN 30 MIN
Every Every Every Every Every
OFF
3 minutes 5 minutes 10 minutes 15 minutes 30 minutes
R REC START
When recording using a DVD-R disc, you need to press
ÆREC twice.
You can change this if you prefer DVD-R recording to work
in the same way as recording to DVD-RW. This function is
factory preset to “2 PRESS”.
RECORD SETUP
CHP INT. ON:3MIN
EXACT REC OFF ON
R REC START
2 PRESS1 PRESS
EX. AUDIO
STEREOD-MONO
D-MONO REC L R
RW INIT. V R VIDEO
SAP OFF ON
SELECT
ENTER
RETURN
ENTER
EX. AUDIO
Select the sound input from the external source.
RECORD SETUP
CHP INT. ON:3MIN
EXACT REC OFF ON
R REC START
2 PRESS1 PRESS
EX. AUDIO
STEREOD-MONO
D-MONO REC L R
RW INIT. V R VIDEO
SAP OFF ON
SELECT
ENTER
RETURN
ENTER
Æ STEREO: Recording standard stereo sound.
Æ D-MONO: Recording the sound that each channel carries
as a separate sound.
D-MONO REC
When recording a external source in Video mode, you can
select the sound to record either “L” (left) or “R” (right)
audio channel.
RECORD SETUP
CHP INT. ON:3MIN
EXACT REC OFF ON
R REC START
2 PRESS1 PRESS
EX. AUDIO
STEREOD-MONO
D-MONO REC L R
RW INIT. V R VIDEO
SAP OFF ON
SELECT
ENTER
RETURN
ENTER
* This does not apply if recording from the DV input.
RW INIT.
When you load a new DVD-RW disc, the recorder starts
initializing automatically. You can select to initialize for VR
mode or Video mode.
* This function works only on DVD-RW discs.
RECORD SETUP
CHP INT. ON:3MIN
EXACT REC OFF ON
R REC START
2 PRESS1 PRESS
EX. AUDIO
STEREOD-MONO
D-MONO REC L R
RW INIT. V R VIDEO
SAP OFF ON
SELECT
ENTER
RETURN
ENTER
Æ VR: Initialize a disc for VR mode automatically
Æ VIDEO: Initialize a disc for Video mode automatically
DV_RW2U#p86-99.p65 03.1.14, 9:28 AM86