Filter
Top Products
80
This section explains each item of playback setup. See
“Basic Settings of the Playback Setup Screen” on page 82
to set each item.
TV MODE
This lets you set whether you want to view played back
material at an aspect ratio of 16:9 for wide screen TVs or at
an aspect ratio of 4:3 for conventional TVs. (This setting is
made to match the TV connected to this recorder.)
ENTER
RETURN
ENTER
PLAYBACK SETUP
TV MODE
16:9
PROGRESSIVE OFF ON
PARENTAL OFF
DISC LANG.
DD LEVEL OFF ON
Digital
OUT PCM
Digital
SELECT
•
PS
4:3
— (Pan & Scan mode): When wide-screen
video material is played, this mode clips the right and
left sides of the image so that it can be viewed on a
conventional TV screen.
• Some wide-screen DVDs that do not permit Pan &
Scan mode playback are automatically played in
letterbox mode (black bands top and bottom).
•
LB
4:3
— (Letterbox mode): When wide-screen video
material is played in this mode on a conventional TV
screen, black bands appear at the top and bottom of
the screen.
•
16
:
9
— (Wide-screen TV): This is the correct mode for
playing wide-screen videos on a wide-screen TV.
• You must also set the screen mode on your wide-
screen TV to “FULL”.
NOTE
When recording wide screen material (16:9) from a
satellite broadcast in the Video mode:
• The screen becomes longer in the vertical direction when
playing back with this recorder or another DVD player
and viewing on a normal (4:3) TV.
• The screen also becomes longer in the vertical direction
when playing back with a PC capable of playing back
DVD video. (The output is set at 16:9 regardless of the TV
screen setting during playback.)
When recording wide screen material (16:9) from a
satellite broadcast in the VR mode:
• When playing back with this recorder and viewing with a
normal (4:3) TV, the screen size during playback can be
changed according to the setting for “TV MODE” of
“PLAYBACK SETUP”. However, if the recording mode of
the disc is set to LP or EP, the material will be played
back in “4:3 LB” even if “TV MODE” of “PLAYBACK
SETUP” is set to “4:3 PS”.
Playback Setup Screen
PROGRESSIVE
Clearer images containing minimal flickering can be
enjoyed when playing back discs by connecting a
progressive-compatible TV with a component.
PLAYBACK SETUP
TV MODE
16:9
PROGRESSIVE OFF ON
PARENTAL OFF
DISC LANG.
DD LEVEL OFF ON
Digital
OUT PCM
Digital
SELECT
ENTER
RETURN
ENTER
Æ ON
Set when the recorder is connected to a progressive-
compatible TV.
• The screen may not switch to a 4:3 screen during
progressive material depending on the TV you are
using. If you want to view material on a 4:3 screen with
such TVs, set “PROGRESSIVE” to “OFF”.
Compatibility of this recorder with Progressive-
compatible TVs:
• Since some progressive-compatible TVs are currently
not completely compatible with this recorder, there may
be times when images may not appear clearly. If a
problem occurs during progressive playback, set
“PROGRESSIVE” to “OFF”.
Æ OFF
Set when the recorder is connected to a TV that is not
progressive-compatible.
• When the recorder is connected to a TV that is not
progressive-compatible and “PROGRESSIVE” is set to
“ON”, there is no video output.
NOTE
• The DV output cannot be used during progressive
playback.
DV_RW2U#p71-85 .p65 03.1.14, 9:23 AM80