Sharp DV-RW2U DVD Recorder User Manual


 
24
Channel Setting
This recorder can receive a maximum of 181
channels as shown below by presetting the
channels into memory.
(VHF: 2 to 13, UHF: 14 to 69, CATV: 1 to 125)
Important!
When you use the recorder for the first time,
press SETUP/FUNCTION. “OSD
LANGUAGE SETUP” screen appears. You
should set the language to be used in the
OSD. See “OSD Language Setting” on page
27 for details.
1
Press SETUP/FUNCTION.
Select “CHANNEL” with ' / "
and then press SET/ENTER.
SETUP
PLAYBACK
RECORD
DISC
CLOCK
CHANNEL
OPTION
OSD LANGUAGE
SELECT
RETURNENTER
ENTER
2
Press \ / | to select AIR or
CATV and then press ".
Example: AIR
To watch CATV after EZ Set Up,
select “CATV”, and then press SET/
ENTER.
3
Press \ / | to set CH SET to
AUTO then press SET/ENTER.
AIR/CATV AIR CATV
CHANNEL PRESET
CH SET AUTO MANUAL
4
The automatic tuning will start.
The channel display will count up,
and when finished, the screen returns
to normal.
NOTE
Automatic tuning will not start unless the
arrow is at “CH SET-AUTO” position.
If a button is not pressed within 3 minutes
during the setting procedure, the screen
will return to normal.
If the power is interrupted for more than
1 hour, AIR / CATV selection must be set again.
Automatic tuning will be interrupted if
SETUP/FUNCTION is pressed before the
screen returns to normal.
Channel Setting
100
EDIT
OPEN/
CLOSE
POWER
SKIP
SEARCH
AUDIO
TIMER
ON/OFF
TITLE
MENU
ANGLE
DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS
+
TIMER PROG.
REC MODE
PROGRAM
AM/PM ERASE
STILL/PAUSE
REC
PLAY
STOP
SLOW
SKIP
F.ADV
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER
INPUT
VOL
CH
TV CONTROL
SETUP/
FUNCTION
ZOOM
INPUT
Adding Channel Memory/
Erasing Channel Memory
Use this function to manually add or erase
channels to/from the memory.
1
Select the channel to be added
with the number buttons and the
channel to be erased with the CH
' / " or number buttons.
2
Press SETUP/FUNCTION. The
MENU screen appears. Press ' /
" to select CHANNEL and then
press SET/ENTER.
3
Press ' / " to select CH SET
and then press \ / | to select
MANUAL. Then press SET/
ENTER.
AIR/CATV AIR CATV
CH SET AUTO MANUAL
CHANNEL PRESET
4
Press \ / | to select ADD if you
want to add the channel memory
or ERASE if you want to erase
the channel memory.
[ADD]
ADD 03
\ / |
[ERASE]
ERASE 03
5
Press RETURN to return to the
CHANNEL PRESET screen.
DV_RW2U#p24-28.p65 03.1.9, 7:33 PM24