Filter
Top Products
30 (GB) Chapter 1 Overview
Location and Function of Parts
Chapter 1 Overview
2 CONTROL connector
You can connect most of the LANC
1)
devices to this
connector. On a regular LANC connector, you can
only switch to the recording mode from the stop mode.
This unit has an extended function that allows you to
switch to the recording mode directly from the
playback, fast-forward, rewind, slow-play, still, cue
and review modes.
Notes
• You cannot control the power on/off of the unit from
a LANC device connected to the CONTROL
connector.
• The CONTROL connector of this unit has only
LANC-S functions. This unit has no LANC-M
functions.
Top Panel
1 Battery cover
You can open the cover when you attach/remove the
battery into/from the battery compartment.
2 Battery cover lock
Unlock when you open the battery cover.
For details on how to install a battery pack, see “Using the
BP-L40(A)/L60A/L90A Battery Pack” on page 32 (GB).
1 Battery cover
2 Battery cover lock
..........................................................................................................................................................................................................
1) LANC (Local Application Control bus system):
Bidirectional interface to control a consumer VCR.