Filter
Top Products
Operating the Menus
Chapter 6 Adjusting and Setting Through Menus
84 (GB) Chapter 6 Adjusting and Setting Through Menus
DISPLAY SET menu
Icon/Menu
Submenu
Setting
(page)
DISP
DISPLAY
SET
EE/PB SET
(page 14 (GB))
Sets the stop, fast-forward and rewind modes.
EE : Outputs the EE pictures (sound, time code).
PB: Mutes the image and sound.
Notes
• Even if EXT SYNC is set to ON, the line-outs (VIDEO OUT2, COMPONENT OUT, S
VIDEO OUT) in the EE mode are delayed from those of the input signals as follows:
– delayed for two lines when the camera composite or VIDEO/REF. IN is input.
– delayed for one line when S VIDEO or camera component is input.
• If this item is set to PB, the output from the unit will be as follows when you press any of
the REC, DUP, or AUDIO DUB buttons separately when the unit is stopped.
REC button
Image
Sound
Time code
EE picture of
the input image
EE sound of the
input sound
(See page 62 (GB))
DUP button Image input to
the DV IN/OUT
connector
Sound input to
the DV IN/OUT
connector
AUDIO
DUB button
Mute screen
(black)
EE sound of the
input sound
No button
is pressed
Mute screen
(black)
Mute (no
sound)
qREMAIN
(page 19 (GB))
Selects whether or not to display the tape remaining time in the LCD monitor and VIDEO
OUT1 output.
ON : Displays the tape remaining time.
OFF: Does not display the tape remaining time.
Note
The display window of the unit always displays the tape remaining time.
DATA CODE
(page 19 (GB))
Selects whether or not to display the data codes on the LCD monitor and the VIDEO OUT1
output.
OFF : Does not display the data codes.
DATE: Displays the date when recorded.
CAMERA: Displays the camera data.
LTR SIZE
Changes the font size of the menu line at the cursor.
NORMAL : Normal size
×2: Double height size