Filter
Top Products
Chapter 3 Playback and Recording
Chapter 3 Playback and Recording 45 (GB)
Recording
This section describes the settings and operations to record on this unit.
For details on connection, see “Connections” on page 35 (GB).
Notes
• Before starting a recording session, set the clock on the unit so that the
recording time can be written into the index signal. You can set the clock
by setting the CLOCK SET on the OTHERS menu.
• If you use a source that is copyright protected, recording and operation
may be restricted.
• During a recording, the tape transport control buttons (except STOP and
PAUSE) are disabled to prevent the tape running mode from being
changed by an incorrect operation. To disable the STOP and PAUSE
buttons, set the KEY INH switch to ON after the unit starts recording. In
this case, set the KEY INH switch to OFF first, then stop or pause the
recording.
Recording Using an External Camera
Settings for recording
1
6
3
2
5
4
7
External camera
DSR-50/50P
(recorder)
(Continued)
Right panel