Sony 50P VCR User Manual


 
Operating the Menus
Chapter 6 Adjusting and Setting Through Menus
78 (GB) Chapter 6 Adjusting and Setting Through Menus
Menu Contents
Initial settings are indicated with rectangles.
TC/UB SET menu
Note
All items other than JOG TC OUT can be set only when you record in
DVCAM-format.
TC
TC/UB SET
Icon/Menu
Submenu
Setting
(page)
TC PRESET
(page 56 (GB))
Resets/Sets the time code value.
RESET: Resets the time code value to 00:00:00:00.
PRESET: Sets the time code value.
RETURN : Returns to the TC/UB SET menu without changing the time code value.
Note
Before setting the initial time code value, set TC MAKE to PRESET. If TC MAKE has been
set to REGEN, you cannot change the time code with this submenu.
UB PRESET
(page 57 (GB))
Resets/Sets the user bits value.
RESET: Resets the user bits value to 00 00 00 00.
PRESET: Sets the user bits value. (You can set the user bits as eight-digit hexadecimal
values (0 to 9, A to F) (base 16) to have the date, time, scene number, and other
information inserted into the user bits.)
RETURN : Returns to the TC/UB SET menu without changing the user bits value.
TC FORMAT
(page 59 (GB))
Selects the frame mode.
AUTO : Automatically sets the frame mode in accordance with the inserted cassette. (If
nothing is recorded on the tape, the mode is set to the non-drop frame mode. If the unit
cannot read the frame mode correctly in the tape, the unit will use the frame mode that
was set in the last position it was able to read correctly on the tape. If you turn the
power on/off or remove the tape, the mode of the last position it was able to read
correctly is cleared and the mode is set to the non-drop frame mode.)
DF: Selects the drop frame mode.
NDF: Selects the non-drop frame mode.
Notes
This menu is displayed only for DSR-50.
Regardless of this setting, the frame mode is set to drop frame when you record in DV
format.
TC RUN
(page 59 (GB))
Selects the advancement mode (counting up).
REC RUN : Time code value advances only while recording.
FREE RUN: Time code value advances even when the unit is not recording. (This mode is
used to set the current time as the initial time code value, or to synchronize the internal
time code to an external time code.)
Notes
If you set the advancement mode to FREE RUN, the time code will be updated by the
internal clock when the power is off. Therefore, when you turn on the unit again, the time
code may have been delayed or advanced somewhat.
If the internal backup battery is exhausted, the time code of the FREE RUN setting is
initialized.