Filter
Top Products
Setting the Time Code and User Bits
Chapter 4 Setting the Time Code and Adjusting the Video Signals
58 (GB) Chapter 4 Setting the Time Code and Adjusting the Video Signals
1 Set the DISPLAY (LCD OFF/OFF/ON) selector to
ON, and the DISPLAY (MENU/TC/AUDIO)
selector to MENU.
The LCD monitor displays the menu. If you turn
the SUPERIMPOSE switch on, the menu is also
displayed on the VIDEO OUT1 output.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
TC
CM
DISP
V
A
LCD
VTR
ETC
2 Rotate the SEL/PUSH EXEC dial to select TC/UB
SET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN
00:00:00:00
TC
CM
DISP
V
A
LCD
VTR
ETC
3 Rotate the SEL/PUSH EXEC dial to select UB
PRESET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN
00 00 00 00
RESET
PRESET
RETURN
TC
CM
DISP
V
A
LCD
VTR
ETC
4 Rotate the SEL/PUSH EXEC dial to select
PRESET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN
OOOO
00 00 00 00
oooo
SET
CANCEL
TC
CM
DISP
V
A
LCD
VTR
ETC
5 Set the first two digits. Rotate the SEL/PUSH
EXEC dial to select the number, then press the
dial.
6 Repeat step 5 to set the other digits.
7 Rotate the SEL/PUSH EXEC dial to select SET,
then press the dial.
The user bits are set and the menu display returns
to step 2.
8 Rotate the SEL/PUSH EXEC dial to select
RETURN, then press the dial.
The menu display returns to step 1.
To cancel the user bits setting
Select CANCEL in step 7, then press the SEL/PUSH
EXEC dial.
To reset the user bits
Select RESET in step 4, then press the SEL/PUSH
EXEC dial.