Filter
Top Products
Chapter 3 Playback and Recording
Chapter 3 Playback and Recording 49 (GB)
Recording Using the Player
Settings for recording
1 Turn on the POWER switch.
2 Select an input signal by switching the INPUT SELECT selector.
DV: to record input signals from the DV IN/OUT connector
VIDEO: to record input signals from the VIDEO/REF.IN connector
S VIDEO: to record input signals from the S VIDEO IN connector
3 Set up the player to play back a tape.
For details, refer to the instruction manual of the player.
4 Set the audio input selectors to LINE.
Note
You do not need to set these selectors if you record signals input from
the DV IN/OUT connector.
5 Set the audio input level control selectors properly according to the
audio level of the player.
1
6
3
2
5
4
7
Player (DSR-40/40P, etc.)
DSR-50/50P
(recorder)
Right panel
(Continued)