Filter
Top Products
Chapter 6 Adjusting and Setting Through Menus
Chapter 6 Adjusting and Setting Through Menus 91 (GB)
Icon/Menu
Submenu
Setting
(page)
VTR
VTR SET
FOOT SW Selects a foot switch mode.
OFF : Disables the foot switch.
EDGE HIGH: Switches between recording and recording pause mode each time you
release the foot switch.
EDGE LOW: Switches between recording and recording pause mode each time you press
the foot switch. (This is the most popular use for foot switch.)
LEVEL HIGH: Records only while the foot switch is released.
LEVEL LOW: Records only while the foot switch is pressed.
The following shows the trigger statuses.
The following shows the foot switch circuit.
Note
You cannot operate audio dubbing or duplication from the foot switch.
EDGE HIGH
EDGE LOW
Recording
Recording
pause
Recording Recording
pause
LEVEL HIGH
LEVEL LOW
Recording
Recording
pause
Recording Recording
pause
DSR-50/50P
5 V
Stereo
minijack
GND
Tally LED
Foot Switch
DV EE OUT
(page 37 (GB))
Selects the output from the DV IN/OUT connector in the EE mode.
OFF : Outputs only the playback video and audio signals from the DV IN/OUT connector.
ON: Outputs the selected analog input signals from the DV IN/OUT connector.
Note
When you connect a computer to the DV IN/OUT connector, depending on your computer
software, the selected analog input signals may be output to the computer even if this item
is set to OFF.
STILL PICT
Switches the image displayed in the still mode.
AUTO : Displays an optimized image according to the movement in the image.
FRAME: Displays a frame image.
FIELD: Displays a field image.
Note
If you select FIELD, the image of field 2 is displayed.