Sony 50P VCR User Manual


 
Duplication (generating a work tape with the same time code)
Chapter 5 Duplication and Audio Dubbing
72 (GB) Chapter 5 Duplication and Audio Dubbing
Warnings about duplication
If an error occurs during duplication, a STOP/
CAUTION number and warning message will be
displayed on the LCD monitor and the VIDEO OUT1
output screen.
The following table lists these warnings and messages.
If a warning message is displayed, check this table and
take the appropriate action.
00
RECORDER:
[DV IN] NOT SELECTED
The INPUT SELECT selector on the recorder (this unit) is not set to DV. t Set
the INPUT SELECT selector to DV.
STOP/
CAUTION
No.
Warning Message
Cause/Remedy
01
i.LINK CABLE:
DISCONNECTED
The DV cable is not connected correctly. t Connect the DV cable correctly.
02
i.LINK CABLE:
MULTI CONNECTION
There are multiple DV connections or the DV connection is looped. t You
cannot connect multiple devices. Connect only one player to this unit.
03
i.LINK CABLE:
BUS RESET
The DV cable has been unplugged and plugged in again. t Check the DV cable
connection. Try to duplicate again.
10
PLAYER:
RECORDING
The player is in the recording mode.
11
PLAYER:
NO CASSETTE
There is no cassette in the player.
12
PLAYER:
UNCONTROLLABLE
The player cannot be controlled, or the duplicate mode has been set to
MANUALq and the cassette in the player has reached the end of the tape.
13
PLAYER:
UNCONTROLLABLE
The player rejects control.
14
PLAYER:
UNCONTROLLABLE
The player is disabled or is in a different mode than the recorder (this unit) has
requested.
15
PLAYER:
NOT DVCAM
The cassette in the player is not recorded in the DVCAM format. t You can
duplicate only a DVCAM recorded tape.
16
PLAYER:
UNCONTROLLABLE
The player has been manually operated or the players protection function
cancelled the playback pause mode when the duplicate mode was set to
AUTOq
or AUTOq.
18
PLAYER:
TAPE INFO. UNKNOWN
The cassette information in the player cannot be read. t If the cassette
information is correct, clean the terminal of the cassette and insert the cassette
again
(see page 97 (GB))
.
19
a)
PLAYER:
CM ERROR
The player could not read the cassette memory during duplication. t If the
cassette memory is correct, insert the cassette again.
21
PLAYER:
EMERGENCY STOP
The player has detected self-diagnostics. t Refer to the instruction manual of
the player.
22
PLAYER:
DEW STOP
Moisture condensation has occurred in the player. t Refer to the instruction
manual of the player.
35
RECORDER:
DVCAM NOT SELECTED
The DVCAM/DV select switch of the recorder (this unit) is set to DV. t Switch to
DVCAM.
37
RECORDER:
NO CM
The cassette in the recorder (this unit) does not have cassette memory, but the
recorder tried to duplicate the cassette memory. t Insert a cassette with
cassette memory.
39
RECORDER:
CM ERROR
The cassette memory data cannot be written in the cassette in the recorder (this
unit). t Clean the gold-plated terminals on the cassette
(see page 97 (GB)).
40
RECORDER:
STOP
The recorder (this unit) stopped while duplicating.