Filter
Top Products
16
Front Panel
Chapter 2 Names and Functions of Parts
To monitor in E-E mode
You can monitor input signals in E-E mode by pressing this
button in stop mode. The button lights when pressed. To
return to the original picture, press the STOP button. You
can view E-E video during playback, search, fast forward,
and rewind while pressing this button.
When a Betacam, Betacam SP or Betacam SX tape is
played, you cannot monitor E-E video.
h PAUSE button
Pauses an operation (when pressed during recording or
playback). You can execute back space editing with use of
this button.
For details on back space editing, see “4-2 Back Space
Editing” on page 41.
i PREROLL button
Cues up the preroll point. You can set the preroll time and
the status after prerolling with setup menu items 001 and
401.
For details on the setup menu item 001, see page 63, and
for 401, see page 69.
j Search dial and indicator
The outer ring is for shuttle playback, and the inner dial is
for jog playback. Press the JOG/SHUTTLE button to make
it lit and turn the ring or dial for playback in jog or shuttle
mode. Turning the dial clockwise plays a tape in the
forward direction (the G indicator lights). Turning the dial
counterclockwise plays a tape in the reverse direction (the
g indicator lights). When the tape stops, the s indicator
lights.
Setting for setup menu item 101 enables a direct search
operation that enables the search dial operation without
pressing the JOG/SHUTTLE button (direct jog/shuttle
mode).
For details on setup menu item 101, see page 66.
k JOG/SHUTTEL button
Press to enter search mode. Each time you press this
button, jog and shuttle mode are toggled, and the selected
mode is indicated in the display window.
2-1-3 Display Window
Operation display
a Menu area
Normally displays the function menu. When you press the
MENU button, the functions of the function buttons used
in setup menu operations are indicated. Depending on the
function of the button, a white bar lights or flashes below
the function name to indicate the current status.
Note
CHARACTR
ON
PB/EE
PB
CONFI
ENABLE
CTL/TC
TC
ASSEMBLE
OFF
TCG SET
HOME
LTC
DF VITC LTC EXT-LTC R-RUN REM:00
M
0
–10
–20
–30
–40
1
CH1 IN :
CH2 IN :
OUT :
MONI L :
MONI R :
–60
INPUT : ANA
–4
HD
COND
P ROLL
D-STOP
BANK 2
DOLBY NR
+4
1
2
SDI ASMBL CONFI ON RECORDER
59.94i
EMPH
2
EMPH
0
–10
–20
–30
–40
3
EMPH
4
EMPH
00:00:00:00.
1 Menu area
2 Audio level meters
3 Audio data
4 Condition area
5 Format area
6 Timecode setup area
7 Time data display area