Filter
Top Products
78
Items in the Extended Setup Menu
Chapter 9 Setup Menus
943 CROSS COLOR CRISP Set the cross color crisp level for down-converter output.
0 to [4] to FH
950 UP CONVERTER MODE (UC) Select the up-converter mode.
[CROP]: Select the edge-crop mode.
L-BOX: Select the letter box mode.
SQUEZ: Select the squeeze mode.
951 H CROP POSITION (UC) Adjust the H-crop (the horizontal position when inserting in the edge crop mode) of
the up/down converter output when menu item 950 is set to EDGE-CROP.
–120 to [0] to 120
952 LETTER BOX POSITION
(UC)
Adjust the vertical position of the letter box mode cutout in up-converter output when
LETTER BOX is selected in menu item 950.
–120 to [0] to 120
953 UP CONVERTER PROCESS
SELECT
Select the original picture to use when converting SD to HD.
FIELD: Use a field picture.
FRAME: Use a frame picture.
[ADAPT] (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
ADAP2 (still picture priority mode): Set the ratio of converting from frames higher
when up-converting.
ADAP3 (motion priority mode): Set the ratio of converting from fields higher when
up-converting.
954 DETAIL GAIN (UC) Adjust the up-converter image enhancer, the sharpness of edge emphasis.
0 to [40H] to 7FH
955 LIMITTER (UC) Adjust the up-converter image enhancer, the maximum detail level added to
emphasize the original signal.
0 to [20H] to 3FH
956 CRISP THRESHOLD (UC) Adjust the up-converter image enhancer. Set the threshold amplitude at which low
amplitude signals are not emphasized.
0 to [8] to FH
957 LEVEL DEPEND
THRESHOLD (UC)
Adjust the up-converter image enhancer. Set the luminance range for edge
enhancement.
0 to [8] to FH
958 H DETAIL FREQUENCY (UC) Adjust the up-converter image enhancer. Set the central frequency and frequency
characteristic for edge enhancement.
3.2MHz: 3.2 MHz
±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
[5.0MHz]: 5.0 MHz
±0.7 MHz
4.0MHz: 4.0 MHz
±2.0 MHz
959 H/V RATIO (UC) Adjust the up-converter image enhancer. Set the horizontal/vertical ratio for edge
enhancement.
0 to [3] to 7
960 GAMMA LEVEL (UC) Adjust the up-converter image enhancer, the slope of the correction curve.
0 to [80H] to 100H
961 BACKGROUND COLOR (UC) Set the color of the background (no material part) when up-converting.
Sub-item
1 BG COLOR Set the color.
[BLACK]: Black
GRAY: Gray
BLUE: Blue
TABLE: Use the TABLE settings.
2 Y TABLE Adjust the Y level of the background.
[0] to FFH
3 B-Y TABLE Adjust the B-Y level of the background.
0 to [80] to FFH
4 R-Y TABLE Adjust the R-Y level of the background.
0 to [80] to FFH
Item
number
Item name Settings