Filter
Top Products
18
Front Panel
Chapter 2 Names and Functions of Parts
e Format area
A System frequency
Displays the system frequency for recording selected with
setup menu item 013.
For details on setup menu item 013, see page 64.
B SDI input display
Lights when VIDEO IN on the P2 VIDEO page of the
function menu is set to SDI and an SDI signal is being
input. If an SDI signal is not input, it flashes.
C ASMBL display
Lights when ASSEMBLE on the HOME page of the
function menu is set to ON.
D CONFI display
Lights when CONFI on the HOME page of the function
menu is set to ENABLE. During confidential playback,
CONFI ON is lit.
E RECORDER/PLAYER display
Lights according to the settings of R/P on the P5 EDIT
page of the function menu. PARA RUN appears in PARA
RUN operations, and two VTRs are controlled
simultaneously.
If setup menu item 214 is set to SDI and the REMOTE
button is lit, SDI RMT appears. It flashes if an HD-SDI
signal is not input, and is continuously displayed if a VTR
control signal of the HD-SDI signal is recognized.
During sequential recording, SEQ RC appears.
For details on the settings of the function menu, see “3-7
Basic Operations of the Function Menu” on page 31.
For details on the setting for PARA RUN, see setup menu
item 201 on page 67.
For details on setup menu item 214, see page 68.
f Timecode setup area
A Time data type
Displays the type of time data displayed in the time data
display area.
B Drop frame display
DF appears when a tape recorded in drop frame mode is
played.
C Timecode type
When VITC is read during playback, VITC is displayed.
When LTC is read, LTC is displayed. During recording,
the type of timecode being recorded appears. In E-E mode,
if the timecode to be recorded can be read, it is displayed.
D Reference timecode
Displays the setting for TCG on the P4 TC page of the
function menu (INT, EXT or SDI).
E Timecode generation mode
Displays the setting for PRST/RGN on the P4 TC page of
the function menu (PRESET, LTC, or VITC).
F REC RUN/FREE RUN indication
Displays the setting for RUN on the P4 TC page of the
function menu (FREE or REC).
G Remaining tape length
Displays the amount of tape remaining in meters.
For details on the settings of the function menu, see “3-7
Basic Operations of the Function Menu” on page 31.
g Time data display area
Displays the time data. During setup menu operations, time
data appears in the upper half, and the menu item appears
in the lower half.
SDI ASMBL CONFI ON RECORDER59.94i
A System frequency
B SDI input display
C ASMBL display
D CONFI display
E RECORDER/
PLAYER display
LTC
DF VITC LTC EXT-LTC R-RUN REM:00
M
A Time data type
B Drop frame display
C Timecode type
D Reference timecode
E Timecode generation mode
F REC RUN/FREE
RUN indication
G Remaining
tape length