Filter
Top Products
23
Preparing Power Sources
Chapter 3 Preparations
3-1-2 Using the Battery Pack
Attaching and removing of the BP-GL65/GL95 Battery
Pack is described below.
The BP-L60(A)/L90(A), BP-L60S/L80S, and BP-M50/
M100 can also be attached and removed in the same way.
Attaching a battery pack
Attach the BKP-L551 Battery Adaptor to the side panel of
this unit and attach the battery pack in it.
For details on attaching the BKP-L551, refer to the
installation manual for the BKP-L551.
1
Remove the two screws on the side panel.
2
Attach the BKP-L551 to the side panel.
3
Align the grooves on the BP-GL65/GL95 with the
projections on the BKP-L551.
4
Slide the BP-GL65/GL95 as shown below so that the
connectors on the BP-GL65/GL95 and the BKP-L551
are connected.
5
Connect the DC cable of the BKP-L551 to the DC IN
12V connector.
Removing the battery pack
With the lever pushed in, slide the BP-GL65/GL95 out as
shown below.
Screws
BKP-L551
BP-GL65/GL95
Lever