Filter
Top Products
89
Specifications
Appendixes
RM-280 Editing Controller
AC power cord
• For customers in the U.S.A. and Canada
Part No. 1-557-377-11
Plug holder 3-613-640-01
• For customers in the United Kingdom
Part No. 1-833-259-11
Plug holder 3-613-640-01
• For customers in European countries other than the
United Kingdom
Part No. 1-551-631-22
Plug holder 3-613-640-01
Design and specifications are subject to change without
notice.
Relation between HKDV-900 setting items
and setup menu of this unit
a) Valid for output only when VIP.PROC on the P1 PROCS page in function
menu is set to MENU.
b) Select whether to set DC or UC with menu item 212 (VIDEO REMOTE
CONTROL SELECT). When both are selected (menu item 212 is U&D),
both of the corresponding menu settings are made, but this unit's answer
values and unity values are the DC values.
HD: HDSDI output during HDCAM playback
DC: Down-converted SD (D1 SDI/COMPOSITE) output
during HDCAM playback
SD: SD (D1 SDI/COMPOSITE) output during SD format
playback
UC: Up-converted HDSDI output during SD format
playback
HD video output phase settings
The HD video output phase is set from the maintenance
menu.
To prevent electromagnetic interference from portable
communications devices
The use of portable telephones and other communications devices near
this unit can result in misoperations and interference with audio and
video signals.
It is recommended that portable communications devices near this unit
be powered off.
Notes
• Always make a test recording, and verify that it was
recorded successfully.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF FAILURE OF THIS UNIT OR
ITS RECORDING MEDIA, EXTERNAL
STORAGE SYSTEMS OR ANY OTHER MEDIA
OR STORAGE SYSTEMS TO RECORD
CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
HKDV-900/503
setting items
Setup menu items of this unit
HD Master 740: MASTER LEVEL (HD)
a)
HD Y 741: Y LEVEL (HD)
a)
HD Pb 742: Pb LEVEL (HD)
a)
HD Pr 743: Pr LEVEL (HD)
a)
HD Setup 745: SETUP LEVEL (HD)
a)
HD Sync Phase 746: SYNC PHASE (HD/UC)
a)
HD Fine 747: FINE (HD/UC)
a)
D1 Master No corresponding menu item
D1 Y No corresponding menu item
D1 B-Y No corresponding menu item
D1 R-Y No corresponding menu item
D2 VIDEO 715: VIDEO GAIN CONTROL (HD/DC/SD/UC)
a)
D2 CHROMA 716: CHROMA GAIN CONTROL
(HD/DC/SD/UC)
a)
D2 HUE 717: CHROMA PHASE CONTROL
(HD/DC/SD/UC)
a)
SETUP 718: SETUP LEVEL (BLACK LEVEL)
(HD/DC/SD/UC)
a), c)
SD Sync Phase 719: SYSTEM PHASE SYNC (DC/SD)
SD Fine 720: SYSTEM PHASE SC (DC/SD)
CROSS COLOR 934: CROSS COLOR (DC)
H CROP
POSITION
932: H CROP POSITION (DC)/
951: H CROP POSITION (UC)
b)
DETAIL GAIN 935: DETAIL GAIN (DC)/
954: DETAIL GAIN (UC)
b)
LIMITTER 936: LIMITER (DC)/
955: LIMITER (UC)
b)
CRISP 937: CRISP THRESHOLD (DC)/
956: CRISP THRESHOLD (UC)
b)
DEPEND 938: LEVEL DEPEND THRESHOLD (DC)/
957: LEVEL DEPEND THRESHOLD (UC)
b)
FREQUENCY 939: H DETAIL FREQUENCY (DC)/
958: H DETAIL FREQUENCY (UC)
b)
H/V RATIO 940: H/V RATIO (DC)/
959: H/V RATIO (UC)
b)
GAMMA 941: GAMMA LEVEL (DC)/
960: GAMMA LEVEL (UC)
b)
CROP 930: CONVERTER MODE (DC)/
950: CONVERTER MODE (UC)
b)
LETTER BOX 930: CONVERTER MODE (DC)/
950: CONVERTER MODE (UC)
b)
SQUEEZE 930: CONVERTER MODE (DC)/
950: CONVERTER MODE (UC)
b)
HKDV-900/503
setting items
Setup menu items of this unit