Filter
Top Products
66
Items in the Extended Setup Menu
Chapter 9 Setup Menus
9-4 Items in the Extended Setup Menu
The expanded setup menu contains the following items.
In the Settings column of the table, the factory setting is
indicated by enclosing parenthesis.
Items 900 to 999 are not applicable in 24PsF/23.98PsF
mode.
Items 100 to 199: Settings for the front panel
Note
Item
number
Item name Settings
101 SELECTION FOR
SEARCH DIAL ENABLE
Select how the unit enters the search mode.
DIAL: Turning the search dial switches to search mode at all times except during
recording/editing.
[KEY]: The JOG/SHUTTLE button must be pressed to switch to search mode.
104 AUDIO MUTING TIME Select the length of time for which audio muting occurs when the unit switches to
playback either from stopped or from still playback in the search mode. (for Betacam or
Betacam SP playback only)
[OFF]: Set the audio muting time to zero (i.e. no muting).
0.1S to 1.0S: Set the audio muting time from 0.1 second to 1.0 second, in 0.1-second
increments.
105 REFERENCE SYSTEM
ALARM
Select whether or not to display a warning when the video/audio reference signal
selected by OUT REF on the P2 VIDEO page of the function menu, is not supplied or is
out of phase with the input video signal.
OFF: No warning.
[ON]: Flash the STOP button as a warning.
107 REC INHIBIT LAMP
FLASHING
Select whether or not to flash the REC INHI indicator when the erasure prevention plug
on the cassette is pressed in.
[OFF]: Do not flash the REC INHI indicator.
ON: Flash the REC INHI indicator.
108 AUTO EE SELECT When a cassette is inserted and PB/EE on the HOME page of the function menu is set
to EE, select the VTR modes in which input video and audio signals are automatically
handled in E-E mode.
[S/F/R]: In STOP/EJECT/F.FWD/REW modes
STOP: In STOP/EJECT modes
109 FORCED EE WHEN TAPE
UNTHREAD
During tape threading and unthreading, and when no cassette is inserted, select
whether the setting for PB/EE on the HOME page of the function menu controls the PB/
EE setting for output signals.
OFF: Control by the function menu item PB/EE
[ON]: No control (always E-E signal)
114 AUDIO MONITOR
OUTPUT LEVEL
Select whether the signal output from the AUDIO MONITOR OUTPUT connectors on
the rear panel is adjustable with the LEVEL adjustment knob on the front panel.
VAR: Adjustable
[FIXED]: Not adjustable
118 KEY INHIBIT SWITCH
EFFECTIVE AREA
Select which switches and buttons can be operated when the KEY INHI switch on the
front panel is set to ON. The following sub-items control different sets of switches and
buttons independently.
Sub-item
1 REMOTE SELECT Select whether the REMOTE button on the front panel is enabled.
[DIS]: Disabled
ENA: Enabled
2 FUNCTION-KEY Select whether the function buttons on the front panel are enabled.
[DIS]: Disabled
ENA: Enabled
3 MODE CONTROL Select whether the operative buttons and switches on the front panel are enabled.
[DIS]: Disabled
ENA: Enabled (except the REMOTE button and function buttons)