Filter
Top Products
76
Items in the Extended Setup Menu
Chapter 9 Setup Menus
a) Not applicable in 24PsF/23.98PsF mode
812 AUDIO OUTPUT LEVEL Set the audio output level.
[+4 dB] 0 dB –3 dB –20 dB
Note
−20 dB is not displayed in the display window.
823
a)
NAU FLG PB Controls the non-audio flag when the playback format is Betacam SX.
Sub-item
1 CH1/CH2 During Betacam SX playback, sets the non-audio flag of a digital audio output as
follows.
[OFF]: OFF (the data is audio)
ON: ON (the data is non-audio)
Notes
• During playback of analog tapes, the non-audio flag is OFF regardless of the setting
for this item.
• In the HDCAM format, the non-audio flag follows the setting for maintenance menu
item M372 during recording and in E-E mode. During playback, it follows the setting
recorded on the tape.
For details on the maintenance menu item M372, refer to the Maintenance Manual.
2 CH3/CH4
824 ANALOG LINE OUTPUT
SELECT
Select audio channels output from the AUDIO OUTPUT connectors on the rear panel.
[CH1/2]: Output the audio channels 1 and 2.
CH3/4: Output the audio channels 3 and 4.
826 AUDIO VOLUME SELECT Assign the audio channels to the REC LEVEL adjustment knobs and PB LEVEL
adjustment knobs on the front panel.
[CH1/2]: Assign the audio channels 1 and 2.
CH3/4: Assign the audio channels 3 and 4.
1(3)/2(4): Assign the audio channels 1/3 and 2/4.
REC4: Assign the audio channels 1 to 4 for recording.
PB4: Assign the audio channels 1 to 4 for playback.
832 ANALOG AUDIO INPUT
MODE
Select the signal recorded on audio channels 3 and 4 when an analog audio input is
selected.
[OFF]: No recording
PARA: Recording channel 1 on channel 3, and channel 2 on channel 4
833 CUE AUDIO INPUT
SELECT
Select the digital audio channel recorded on cue channel.
OFF: No recording
CH1+2: Recording audio channels 1 and 2
CH3+4: Recording audio channels 3 and 4
[CH1]: Recording audio channel 1
CH2: Recording audio channel 2
834 AUDIO INPUT LEVEL Set the analog audio input.
Sub-item
1 CH1 [LINE]: line input
MIC: microphone input
2 CH2
3 LINE LEVEL Set the line input level.
[+4 dB] 0 dB –3 dB –20 dB
835 CUE REC LEVEL ATT Set the recording level on the cue track.
0 dB [–3 dB] –6 dB –9 dB –12 dB
836 DIGITAL AUDIO MUTING
IN FF/REW MODE
Select whether the playback sound is muted in fast forward or rewind mode if the
playback format is HDCAM or Betacam SX.
OFF: The playback sound is not muted.
[ON]: The playback sound is muted.
Item
number
Item name Settings