Filter
Top Products
82
Warning Messages
Chapter 10 Maintenance and Inspection
10-4 Warning Messages
If the unit detects abnormal status that has been set to be
detected, the warning mark flashes at the right bottom in
the display window. Even if the warning mark is flashing,
you can operate the unit. When you press the MENU
button together with the SHIFT button, a warning message
appears in the display window. The warning message is
stored in the error logger menu.
Warning messages
Setting the warning message to be
detected
1
Press the MENU button together with the PAGE
button.
The WARNING screen appears.
2
Press the C EDIT function button.
3
Turn the MULTI CONTROL knob to display an item
to be detected in the display window.
On the video monitor screen, move * to an item to be
detected.
4
Press the ON/OFF function button to go out OFF.
5
Press the SAVE function button.
The setting is stored, and the set message will be
detected.
Canceling detecting warning messages
Select a warning message to be cancelled, and press the
ON/OFF function button to display OFF.
Message Description
REFERENCE
MISSING
No reference signal is input.
LOST LOCK Capstan servo lock is released
during playback, recording or editing.
NO VIDEO INPUT
REC
No video signal is detected during
recording.
ASYNCHRONOUS
VIDEO REC
Phase difference of the video input
signal and reference signal exceeds
the allowable range during recording.
APR HARD AU
MUTING
An audio signal is muting because of
unlocking of PLL in an audio circuit.
HD TG UNLK AU
MTING
An audio signal is muting because of
unlocking of PLL of the HD timing
generator.
SD TG UNLK AU
MUTING
An audio signal is muting because of
unlocking of PLL of the SD timing
generator.
NO RF AU MUTING An audio signal is muting because
data on a tape cannot be read.
AUX DATA AU
MUTING
An audio signal is muting because of
incorrect system frequency.
VIUC
DF INT- PRE F-RUN REM: M
0
–10
–20
–30
–40
1
CH1 IN :
CH2 IN :
OUT :
MONI L :
MONI R :
+4
INPUT : SDI
+4
COND
SHIT
+4
1
2
SDI
59.94i
2
0
–10
–20
–30
–40
34
00:00:00:00
(01):REFERENCE MISSING
C EDIT
ERR LOG
EXIT
WARNING
Warning message Warning mark