Filter
Top Products
42
Executing a Series of Commands
— System Control Functions
(continued)
8 Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
To display and change the Label
keys for timer program numbers
Press the TIMER button repeatedly. For
timer settings, see page 64.
When you select the Component
name, go to Step 6.
When you select the system number
or the timer program number, go to
Step 7.
6 Press the INTERVAL key.
The current interval setting stays lit,
and (+) and (–) flash.
7 Press the (+) or (–) key to change
the interval. You can control the
interval from 100 to 900 ms in
units of 50 ms.
Each time you the (+) key is pressed,
the interval increases by 50 ms.
Each time you the (–) key is pressed,
the interval decreased by 50 ms.
(ms: 1/1000 second)