Filter
Top Products
87
5 Press the COMMANDER OFF
button.
COMMANDER
OFF
If you hold COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you hold COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
1 Follow Steps 1 - 4 on page 41.
2 Select the component name
whose interval you want to
change by pressing the
Component Select button or the
Label key.
(To change the Label keys, press the
OTHER button repeatedly.)
3 Press the KEY key.
The keys of the selected component
appear as set at the factory.
0 second: Stays lit
1 second: Flashes
2 seconds: Flashes slowly
4 Press the key you want to adjust.
The beaming time is changed with
each press of the key (from 0 to 2
seconds).