Filter
Top Products
81
7 Press the (+) or (–) key to change
the brightness level. Then press
COMMANDER OFF to decide the
brightness level. The display
returns to Step 3.
You can adjust from level 1 to 10.
Each time the (+) key is pressed, the
level increases by 1.
Each time the (–) key is pressed, the
level decreases by 1.
8 Press the ON MODE key.
The commander enter the setting
mode to select the buttons to lighten
the display window. The current
setting (LIGHT or ALL) stays lit. The
other flashes.
9 Press the LIGHT or ALL key to
select the buttons on the
Commander to light the display
window.
If you press COMMANDER OFF, the
display returns to Step 3.
LIGHT: The Display Window is lit by
pressing the LIGHT button
only.
ALL: The Display Window is lit by
pressing any button on the
Commander except the
VOLUME +/–, MUTING,
CHANNEL +/–, RECALL and
COMMANDER OFF.
Note
If you use the Commander frequently with
the “ALL” position, the battery life may be
short. In this case, shorten the Automatic-
Off time (page 78).
10
Press the FADE key.
The current setting (ON or OFF) stays
lit. The other flashes.
11
Press the ON or OFF key to select
the fade setting.
If you press COMMANDER OFF, the
display returns to Step 3.
ON: fade in/out backlight
OFF: normal backlight
12
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previously
set mode.