Filter
Top Products
55
7 Press the key or button on the
Commander you want to “teach.”
“LEARN” flashes and the only
pressed key remains on the display.
8 Press and hold down the button
on the other remote control until
you hear a beep.
(If you release the button before you
hear a beep, the signal may not be
learned correctly.)
“LEARN” stops flashing and stays lit.
When the command has been learned
successfully, the learned keys stay lit
and the other learnable keys flash.
If “NG” flashes on the display
Learning did not succeed. Try Steps 7 and 8
again.
9 Repeat Steps 7 and 8 to teach
functions to the same keys or
buttons.
To teach the same function
Repeat Steps 7 and 8 with the same button.
To teach another function
Repeat Steps 7 and 8 with the other buttons
you want to teach.
You can teach a maximum of 4
functions for one key or button.
10
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previously
by set mode.