Filter
Top Products
69
Changing the program
already set or changing
another program that you
select
1 Follow Steps 1 - 3 on page 65.
2 Press the COPY key.
If you want to change the program
already set, go to Step 6 without
pressing the COPY key.
The program number appears on the
left Label key, and “COPY” flashes on
the right Label key.
3 Press the COPY key repeatedly
until the program number of
which contents you want to
change appears.
(Each time the COPY key is pressed,
the program number which has the
timer setting information appears in
order.)
4 When the program number of
which contents you want to
change appears on the left Label
key, press that Label key.
With a beep sound, the contents of
selected program is copied to the
program number on the Mode
Display key (in this case, PROG4).
The day of the week and the time for
the copied timer program are
displayed on the Clock Display key.
“ON/OFF,” “TEST,” “SETUP,” and
“COPY” flash on the Label keys.
5 Press the SETUP key.
“DAY,” “TIME,” and “MACRO” flash.
6 Press the key of which contents
you want to change.
DAY: See Step 5 on page 66.
TIME: See Step 6 on page 67.
MACRO: The display turns as below.
Continued