Filter
Top Products
75
5 Press the key you want to set.
6 Press the component button to be
referred to.
TV
7 Press the key you want to be
referred to.
Note
You cannot select an already set alias key.
8 Repeat Steps 5 and 7 to create
other alias keys.
9 Press COMMANDER OFF
button.
COMMANDER
OFF
If you hold COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you hold COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
To clear an alias key and button
1 After Step 4 (page 74), while
pressing the DEL key, press the
key or button you want to erase.
The cleared key flashes together with
other settable alias keys.
Tip
You can clear all the alias keys at once,
while pressing the DEL key, press the Mode
Display key. After clearing all the (preset)
alias keys in the MULTI mode, you can
return to the factory setting by following
the procedures on page 27.
2 Press COMMANDER OFF.
COMMANDER
OFF
If you hold COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you hold COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.