Filter
Top Products
58
10
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
Note
Be sure that the receiving Commander is ready
to receive data.
To transfer the data of a
Component Select button or a
Label key
The data of a Component Select button or
a Label key on this Commander (the
settings and learned signals programmed
on the keys and buttons) can be
transferred to a Component Select button
or key on another Sony RM-AV3100.
1 Follow Steps 1 to 6 on page 54.
2 Press the COMPO key.
COMPO
“COMPO X” appears on the Mode
Display key, and the selected
component name appears on the left
Label key.
3 Press the Component Select
button of which data you want to
send.
Or press the Label key of which data
you want to send. (To change the
Label keys, press the OTHER button
repeatedly.)
TV
The component name of which
contents are to be transferred appears
on the left Label key.
4 Confirm that the receiving remote
commander is ready to accept
data.
(To set the receiving commander,
follow the procedure on page 59.)
Transferring Data between
Commanders (continued)