Filter
Top Products
Chapter 7 Menus
85
7-3 Extended Menu
• Calculating the date difference among source materials.
The source material is recorded based on the MJD
(Modified Julian Date), which enables easy calculation
of date difference among source materials.
Setting UMID ownership information
Proceed as follows.
1
Set extended menu item 029 “STORED
OWNERSHIP” to “on.”
See 7-2-2 “Basic Menu Operations” (page 74) for
more information about how to make this setting.
2
Set the following item.
To change the currently selected item
Hold down the STOP button, and turn the jog dial or
shuttle dial.
To select a different digit to be changed
Turn the jog dial or shuttle dial.
To change the value of a digit
Hold down the SHUTTLE button, and turn the jog dial
or shuttle dial.
3
Press the SET button.
About UMID ownership information
COUNTRY (country code)
Enter an abbreviated alphanumeric string (4-byte
alphanumeric strings) according to the values defined in
ISO 3166-1.
There are about 240 country codes.
Find your own country code on the following home page.
Refer to ISO-3166-1:
http://www.evertype.com/standards/iso3166/iso3166-1-
en.html
When the country code is less than 4 bytes, the active part
of the code will occupy the first part of the 4-bytes and the
remainder must be filled with the space character (20h).
Example: In the case of Japan
For Japan, if the country code is JP, it is 2 bytes, if JPN, it
is 3 bytes.
Thus, enter the following:
JP_ _
or
JPN _
where _ represents a space.
ORGANIZATION (organization code)
Enter an abbreviated 4-byte alphanumeric string for the
organization code.
Notes
• Organization codes must be acquired by applying to the
SMPTE registration office.
When no organization code has been acquired, it is
forbidden to enter an arbitrary string. As a rule, the code
“00” must be entered. Freelance operators who do not
belong to an origination should enter “
∼
.”
• There are no problems in recording or playing back
audio-video signals, if ORGANIZATION is not set.
USER (user code)
Enter the 4-byte alphanumeric strings for user
identification.
The user code is registered with each organization locally.
It is usually not centrally registered.
When the country code is less than 4 bytes, enter the
country code from the beginning of the 4 bytes and enter
the space character (20h) in the remaining strings.
This user code is determined by the organization. The
methods used depend on the organization.
Note
User code cannot be entered when no organization code
has been entered.
Item Contents
COUNTRY Country code
ORGANIZATION Organization code
USER User code